EFP Fibre Transport 12G/3G-SDI, Audio,Intercom, Data, Genlock, Ethernet, Tally   is a new portable fibre interface designed for use in Outside Broadcast and special events. A mixture of video and audio signals are combined to provide a flexible and cost effective solution for many production applications. it is specifically designed to mount on the back of a broadcast camera offering full comms, control and genlock plus Multi-Channels 12G / 3G-SDI signals.

Description:

BY-EFP-406 for Panasonic AG-HPX370 includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the Panasonic AG-HPX370 or AG-HPX500 series camera to the Base Station, Reverse video(SDI or CVBS), Remote control data(Panasonic’s 10 pin interface, Connect Panasonic RCU AJ-RC10G、ECU AG-EC4G), Intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected Clearcom or RTS , etc intercom main station), Tally(1 or 2 colors is optional). Genlock signal, blackburst/trilevel sync or Time code is optional. The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.

BY-EFP-406 for Panasonic AG-HPX500

Features:

• Handle all Pathological patterns

• Automatic cable equalization to ensure signal integrity

• 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M

• 10+Km on single mode fiber or 300m on multimode fiber transmission

• Mic inputs with mute and pre-amps ,with amplifier for phones

• Remote control for SONY’s or Panasonic’s camera

• V-mount or A-mount battery plate is optional

Specifications:

General index

Work Temp: -25°C to 55°C

Storage Temp: -40°C to 85°C

Humidity: 0 ~ 95% (non-condensing)

Camera Optic Adaptor

Input power: DC 11~19V

Power consumption: <8W

Net weight: 1kg

Appearance size: 188mm*116mm*45mm(without V-mount / A-mount)

Optic Base Station

Input power: AC90~240V

Power consumption: <20W

Net weight: 3kg

Appearance size: 19” 1U standard rack mount

Optical:

Wavelength: 1310nm / 1550nm / CWDM

Output Power: -6~-1dBm

Rx sensitivity: <-18dBm

Transmission Distance: SM fiber 10+km , MM fiber 300m

Optical connector: Dul LC /FC/ST/SC/ Lemo 3K.93C/ Neutrik OpticalCON DUO

SDI input/output:

Signal format: SMPTE 424M, SMPTE 292M, SMPTE 259M

Data rate: 270Mbit/s - 1.48Gbit/s - 3Gbit/s

Cable Equalization: Automatic cable EQ (Belden 1694A cable)

                             250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s

SDI interface: BNC 75 Ohm

Intercom:

Camera Optic Adaptor

Interface:   4pin XLR(Male) /5pin XLR(Female)

Microphone: Mic inputs with mute and pre-amps

Headphone: With amplifier and volume up or down

Optic Base Station

Interface:

    3pin XLR Female/Male:   Party line audio for Clearcom or RTS Intercom main station

    DB9(Male):                      Line level audio input and output

Tally:

Camera Optic Adaptor

Interface: 4pin air head or 3pin mini XLR

Output:     Dry Contact Closure or wet LED+/-

                 On: short or LED on

                 Off: open or LED off

Optic Base Station:

Interface: DB9(Male)

Input:       Dry Contact Closure or TTL

                On: short to GND or TTL low

                Off: open or TTL high

Remote：

Camera Optic Adaptor

Interface:   SONY’s 8 pin or Panasonic’s 10 pin interface

Data: RS422 /RS232/RS485

Optic Base Station

Interface: SONY’s 8 pin or Panasonic’s 10 pin interface

Data: RS422 /RS232/RS485

Diagram:

(for the large photo,   please enlarge the same photo at the headline)